Click on the image to check the artwork
By certification 
Product Specification
material:PA6 NOLY with printing
size:11*11CM
parameter:10W ,110V~240v,3FTcable
work temperature :180-230 ℃ .
preheat time : within 3mins,
additional function：don’t drop glue within 1mins,
package :blister or color box,,include two glue sticks of high quality and triangle support
Product Properties
Perfect printing design and comfortable hand feel make the product more popular with children
Characteristics
1.The heater component of the product is made of PositiveTemperture Coefficient Electric resistance(PTC).It is heating very fast and automatic of control temperature. The hot melt glue gun can use normally in 100V to 240V electrical,inside place the fuse,use more safe
2.The heater body installment was designed to insulates heat.It is work longer life
Features
1.handy and lightweight,comfortable and hold in hand ,
2.heats quickly (3-5mins), no waste of time ,
3.easy operation,two finger trigger,move up and down in an arc,
4.comes with metal stand to match you need better ,
4.wide application in handcraft and repair job
Product advantages
Factory directly sales ,High quality glue gun , OEM production with more less cost, multiple styles design suitable for adults and children, more in line with the DIY group love.Multi-type packing: blister or color box, toolbox, suitable for home and industrial fields
Cautions
1.This glue gun with printed use a glue strip with diameter of 7mm or 11mm. If the applied glue strip size does not match, the gule gun may be damaged by the melting glue recirculation
2.Please do not touch the nozzle when using the glue gun, because the nozzle and glue liquid are very hot to prevent scalding
3. Please do not pull the glue strip out of the gun during the use of the glue gun, because the melted glue may cause burns or damage to the gun.
4. If the glue gun has not been glued for 20 minutes, please cut off the power supply to prevent the glue gun from being damaged by the reflow of molten glue.
>> if the supply cord is damaged. It must be relaced by the manufacturer,its service agent or similarly qualified persons in order to avoid a hazard
>>This appliance is not intended for use bypersons(including children)with reduced physical,sensory or mental capabilities,or lack of experience and knowledge,unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
>>Do not expose to rain ot moisture.
>>Be aware that heat may be conducted to combustible materials that are out of sight.
>>Place the appliance on its stand after use and allow it to cool down before storage.
>>Do not leave the appliance unattended when it is switched on.
>>For interior ues only.
>>Disconnect gun from mains when not in use for more than 30 minutes.
>>When recharging with a new stick,allow 1 minute before reusing.
>>Do not force glue sticks into gun.
>>Do not apply excessive pressure to the trigger as this can cause blockages.if blockage occurs. Leave to stand for 1minute and try again.
>>Always rest gun on stand on piece of cardboard or plywood after use .Do not lay gun on side .Note that glue can drip slightly from the nozzle after use.
>>Not suitable for bonding items that will become hot or damp or contain liquids when theyare used.
http://www.right-diytools.com/
