Click on the image to check the artwork
By certification 
Aluminum radiators are made according to Italian technology from high-strength aluminum alloy, by injection molding. Covered with an anti-corrosion coating and painted with white powder enamel with subsequent kiln firing. Manufacturing, testing. the finishes of this model are combined into a single high-tech process. Each section of the radiator is tested for strength at a pressure of 24 atmospheres.
They have a higher heat transfer coefficient than bimetallic radiators - with the same dimensions, the heat transfer area is 10% larger.
Model Number |
SH-CO-500A3 |
Central distance |
500mm |
Dimension |
580/78/78mm |
Net weight with nipple |
0.88kg |
Net weight without nipple |
0.80kg |
Water content |
0.25L/pc |
Working pressure |
1.6mpa |
Box size for 10 sections |
80*8.1*59.5cm |
The approximate amount contained in 40 HC / sec. |
17300 Sections |
This form of water pipe has good pressure strength.
This model goes well to Russia, Ukraine, Kazakhstan, Uzbektan, etc.
http://www.nawas-radiator.com/
